|
CM-2 Camera Master II
|
The Camera Master II is a digital, hand-held, battery operated meter that measures six different characteristics of any video signal. Use it for fast and accurate set-up of any video source.
SYNC (40 IRE Units) Use this to check for correct end of line terminations and camera sync output level.
LUMINANCE (100 IRE Units) Enables the camera Iris to be accurately adjusted to the correct brightness setting for uniform level and to prevent DVR overload.
COMPOSITE (140 IRE Units) Measures the peak to peak level of the video signal. 140 IRE Units = One Volt of video.
COLOR BURST (40 IRE Units) Measures color burst amplitude on the Back Porch of video. Used to measure cable slope loss at high frequency and adjust video amplifiers.
FOCUS Used to adjust camera for best focus on scene. Maximum
meter reading occurs at sharpest focus. The digital readout
eliminates subjective guess work.
GROUND-LOOP This measures the troublesome 60Hz ground loop voltage that causes Bars on the video picture. You can use this measurement to verify that no ground loop exists in the video before you leave the job.
The Sync, White, and Composite amplitude measures the sync-towhite ratio and the overall video waveform amplitude on any part of an NTSC CCIR (CCTV) or PAL video system, including camera origination, video levels in Distribution Amplifiers, Video Switchers, CCTV installations, Studios, Microwave and Satellite transmission systems. The hand-held battery operated CAMERA MASTER will allow you to take
video measurements anywhere. You will be able to trouble-shoot camera installations and do the job faster with confidence.
SYNC:
Amplitude -10-100 IRE Units (40 Nominal)
Accuracy -1% +/- one digit
Type of measurement -Sync to Back Porch
LUMINANCE:
Amplitude -0-199 IRE Units (100 Nominal)
Accuracy - 1% +/- one digit
Video content -Luminance, (I.R.E. Filter)
Type of measurement -Peak White to Back Porch
Control -Camera Iris (Iris Control)
COMPOSITE:
Amplitude - 0-199 IRE Units (140 Nominal)
One Volt Peak-to-Peak - 140 IRE Units
Accuracy - 1% +/- one digit
Type of measurement - Sync to Peak White
COLOR BURST:
Amplitude - 0-100 IRE Units (40 Nominal)
Color Burst frequency - 3.579 MHz (CCTV / NTSC)
Accuracy - 1% +/- one digit
Correction Control -Cable Slope Equalizer
FOCUS:
Maximum sharpness -Maximum Number Display (focus Ring)
GROUND LOOP:- 0-1.99 Volts (Ground Shield Measure)
VIDEO INPUT:
Video Standard - CCTV, NTSC, Composite
Impedance - Hi-Z (Loop-through Bridging)
Connectors - 2 BNC (Female) Loop-through
POWER:
Battery Type - 9 Volt Alkaline or Ni-cad
Ni-cad Charger - Sold Separately
Automatic Shut-off - 2-3 Minutes ( 2 Min. Typical)
Low Battery Indicator - Rapid Flashing LCD
MECHANICAL:
Size - 4”W. x 8”L. x 2”D.
Material Housing - ABS
Numeric Display - 1/2” High 3-1/2 Digit LCD Display
Measurement Selector - 5 Position Rotary Switch
Tilt-Stand - Folding Wire Bail
|
Reseller Price: Click Here To Register
Buy Product Online | Visit Store Home
|
|
|
Manufactured by securityideasvar |
|
|
|
|
Other Items from Installation Tools
FM Systems CM-1 Camera Master -
CM-2 Camera Master II -
AIM24-7371P All Purpose Wire Stripper -
HT-106C F Connector Crimp Tool -
EverFocus EF-EN220 5.6" Portable TFT/LCD Color Service Monitor Kit -
AIM24-8859P BNC Crimp Tool -
AIM24-7472P 6 Piece Precision Screwdriver Set -
|
|
Return To Security Cameras, Network Security Cameras and Home Security Camera Products from securityideasVAR.com
|
|
|
|
