500' pull box or 1000' reel

Description:
• Siamese type configuration with separation web
• RG-59/U Type coax plus one pair 18 AWG stranded
• (Coax) solid bare copper conductor 20 AWG
• Gas injected polyethylene coaxial core Nom. OD .142 inch (3.61 mm) with an aluminum polyester tape barrier
• Bare copper braid shield 95% coverage
• Unshielded 18 AWG twisted pair employing PVC insulation and PVC fillers
• Overall PVC jacket Nom. OD .232 x .460" (5.89 x 11.68 mm)
Applications:
Indoor cable (non-conduit per NEC) for:
• CCTV
Rating as per NEC:
• UL listed NEC type CM as defined in Article 800
• C(UL)+ listed CMH
• Constructed in accordance with UL Standard 444
• Listed as being resistant to the spread of fire as defined in Section 800 of the National Electric Code.
Installation Characteristics:
• Minimum Bend Radius: 2.5"
• Maximum Pulling Tension: 45 lbs.
Color Code:
Conductors: 1. Black, 2. Red
Jacket Color: Black
Special Notes: +C(UL) CMH Canadian UL accepted mark replaces PCC-FT1 Rev. 1. 1/2000
Electrical Characteristics:
• Nominal capacitance: 16.2 pf/ft 53.1 pf/m*
• Vel. of Prop.: 82%
• Nominal Impedance: 75Ω
• 20 AWG Nom. D.C.R. @ 20°C: 10.1Ω/1000 ft.
• 18 AWG Nom. D.C.R. @ 20°C: 6.6Ω/1000 ft. *Capacitance between conductors. ]
CAUTION: Dry locations only. The electronic characteristics of this cable may change due to excessive tension, crushing, and application of pulling compounds during installation.
Spec Sheet in PDF format